I always have so many scraps of tiny remnant fabric, leftover from sewing projects and whatnot. These bits might be small but they're full of colour and texture and personality - little snippets of designs I dreamt up in a notebook and turned into a real-life thing. And the texture of the fabric really shines when you've got little itty bits - the raw roughness of flax linen, the supersoft and pure white of quilting cotton and the body and texture of organic hemp.

Yonks ago I made a heap of buttons and did a little DIY tutorial (hello, old blog!) Back then I started out with a process that was a lot more complicated (involving sewing the fabric edges and gathering it, eek) but there's a much easier way and all it involves is buying a couple of really cheap tools, so I figured it's about time I did an updated tutorial. It takes no time at all to whip up a bunch of buttons yourself once you're set up, so get onto it!

CRAFT TUTORIAL: FABRIC COVERED BUTTONS

TOOLS

• Fabric scissors

• Fabric scraps (preferable of different prints and textures, but that work together)

• Metal self-covered buttons - shells (the front) and backs (shanks). I use the 23mm size, 7/8", which is US size 36).

• Self covered button assembly tool, to match your button size (these cost around AU$5, you can buy them online)

• A circle template to match your button size (you can get fancy ones with an inner circle cut out, so you can see how much of the fabric will show on the finished button, but I like the surprise of not quite knowing! You can see mine below - I made it using a piece of plastic cut to 22mm)

METHOD

STEP 1: Use the circle template the cut a bunch of fabric scraps to the right size.

STEP 2: Place the fabric, right side down, on top of the tool base. Then place the button, right side down, on top of the fabric, along with the blue presser tool.

STEP 3: Press the button and fabric into the base. You may need to apply a bit of pressure and sometimes it's easier to turn it upside down, as per step 6.

STEP 4: Smooth out any kinks in the fabric at the button edge. 

STEP 5: Position the button back/shank on top of the neatened fabric.

STEP 6: Place the blue presser tool on top of the button back (hollow side down) and turn upside down. Press the tool base. You'll feel it click when the back is locked in place.

STEP 7: Admire your handiwork!

That's it! Sooo simple. Once you start making some buttons, you'll get addicted and want to make a heap. What do you do with them? I've put them on clothes, cushions, used them as decorations on gifts, used them tied into hair elastics - the possibilities are many. Or get flat backs and glue a magnet on the back and put them on your fridge. Happy crafting!